Shijiazhuang Industrial Pump Factory Co., Ltd

CH Series Ash-Flushing Pump Product Description - Single case, horizontal version pump - Wet parts such as casing, impeller, liner plate in anti-abrasion high chrome cast iron alloy. - Hydraulic optimization design, high-efficient, energy-saving and stable operation Technical Specifications Performance and main Technical Datas of CH Series Pumps Type Allowable  max.power of  ass.motor(kW) Clear water  performance Particle max. Size handled  occasionally (mm) Pump weight (kg) Q Capacity (m3/h) H Head (m) n Speed (r/min) Max.eff. (%) (NPSH)r (m) 150CH-F50 250 156-719 18.5-96.2 700-1480 76.0 2.5 / 1150  

ZJG Series Filter Press Feed Pump Product Description Filter Press Feed Pump : The filter press feed pump is to supply slurry to the filter chamber of the filter press. The filtration speed of the filter press depends on the feed pressure, and the feed pressure is related to the strength of the filter press and the head of the feed pump of the filter press. Therefore, when choosing the feed pump of the filter press, in addition to considering the performance of the conveying slurry, the feed pump and the filter press must be matched with each other. Common feed pumps for filter presses include centrifugal pumps, screw pumps, roots pumps, diaphragm pumps and plunger pumps. The centrifugal pump  has the characteristics of high speed, small size, light weight, high efficiency, large flow, simple structure, no pulsation of conveying liquid, stable performance, easy operation and convenient maintenance. Therefore, except for special circumstances, centrifugal pumps should be preferred. Pump

As a   Slurry Pumps Manufacturer , share with you. For the normal use and life of the metal liner pump slurry pump, regular inspection and maintenance should be carried out. Here are a few simple methods for maintaining the slurry pump: Horizontal Slurry Pumps 1. The slurry pump has been injected with a proper amount of oil before leaving the factory to lubricate the mechanical seal. The oil should be checked once a year. If you find water in the oil, you should drain it, replace the oil, replace the gasket, and tighten the screw plug. After three weeks, it must be checked again. If the oil becomes emulsion again, the mechanical seal should be checked. 2. When the slurry pump is not used for a long time, it should be cleaned and lifted and placed in a ventilated and dry place, taking care to prevent freezing. If placed in water, run for at least 30 minutes every 15 days (not dry grinding) to check its function and adaptability. 3. The cable shall be inspected at least once a year. If i