Slurry Pump For Sale

-

 

Slurry Pump For Sale

Slurry Pump For Sale

Slurry pumps actually have certain risks when working in a high temperature environment. However, when we use them, we sometimes encounter heat generation of the pump body. This is naturally not possible for the normal use of the instrument, so what should we pay attention to? What about the matter? As a Slurry Pumps Manufacturer, share with you.

1. During operation, if pump noise or abnormal sound is found, please stop the pump immediately for inspection.

2. The pump should be checked regularly every 2000 hours. The friction loss of the gap between the impeller and the pump body (or pump cover) should not be too large, and the gap should not exceed 1.5mm. If it exceeds, the impeller or front cover can be replaced.

3. If the slurry pump has been working for 6 hours, the mechanical seal should be checked and repaired or replaced according to the degree of wear, otherwise the pump shaft and bearings will be damaged.

4. Pay attention to the bearing temperature of the pump, which should not exceed the external temperature of 35 degrees, but should not exceed 75 degrees.

5. The oil cup should be filled with calcium-based grease to ensure the normal lubrication of the bearing.

6. After the submersible pump has been running for 100 hours, the grease in the motor support oil cup should be checked and regularly replaced.

7. Regularly check the elastic coupling, and pay attention to the temperature rise of the motor bearing.

Our company also sells Slurry Pump For Sale, welcome to contact us.

Comments

Post a Comment

Popular posts from this blog

Types of pumps suitable for mine sites

-
Image
Mine sites demand durability and reliability above all else for critical equipment such as pumps. Besides this, it is important that these pumps can handle the arduous nature of the pumped liquid. With a wide variety of pumps available for mine sites, deciding which one is right for your application can be challenging. In this blog, we  chat with our specialised Project's Team  to identify the different types of mine pumps available and what applications they are most suitable for.   SGB Pumps recommend the following pumps for mine sites: Slurry Pumps Slurry pumps are specifically built to handle the highly abrasive, high-density nature of slurries. Depending on the brand, slurry pumps maintain high efficiencies over the wear life of their components. There are a wide range of construction materials for maximum abrasion and corrosion resistance to suit various demanding mine site applications.   SGB Slurry Pump SGB slurry pump offer operators a completely d...
Read more

How to choose the right shaft seal for your slurry pump?

-
Image
In the classification of pumps, according to its condition of conveying slurry, we call the pump which is suitable for conveying liquid (medium) containing suspended solids as slurry pump. Slurry pump is currently one of the indispensable equipment in various processes such as mineral processing, coal processing, desulfurization and filter press feeding. As people pay more and more attention to environmental protection, the sealing of slurry pump is also paid more and more attention. Slurry pump shaft seal  mainly has three kinds: packing seal, vice impeller seal and mechanical seal. Each of these three shaft seals has its own advantages, which are introduced as follows.     Packing seal. The packing seal of the slurry pump relies on the soft and hard grinding between the packing and the shaft sleeve to achieve the sealing effect. Packing seal needs to add shaft seal water, and its pressure must exceed the slurry pump discharge pressure. This type of seal is easy to repla...
Read more

Slurry Pump For Sale

-
Image
Slurry Pump For Sale A slurry pump  is a type of pump designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, size of solid particles, shape of solid particles, and composition of solution. Slurry pump are more robust than liquid pumps; they have added sacrificial material and replaceable wear parts to withstand wear due to abrasion. Centrifugal, positive displacement, and vortex pumps can be used for slurry. Centrifugal slurry pumps can have between bearing-supported shafts with split casing or rubber- or metal-lined casing. Configurations include horizontal, vertical suspended and submersible. SGB Slurry Pump  is usually classified according to the concentration of solids. Engineering classification of slurry is more complex and involves concentration, particle size, shape and weight in order to determine abrasion severity.
Read more