Difference Between Submersible Slurry Pump And Submerged Slurry Pump

-

Difference between submersible slurry pump and submerged slurry pump

1. The submersible slurry pump works by immersing the slurry pump and motor directly into the liquid without additional fixed support, while the submerged slurry pump generally needs to be fixed, and the motor is above the liquid level when the submerged slurry pump is running.

2. The submersible slurry pump Zui has a large working depth. At present, the design depth is 25m, the standard Zui depth of underwater slurry pump is 1.8m, and the design depth of our company can reach 10m.

3. The stability of submersible slurry pump is higher than that of long shaft submerged slurry pump;

4. The submersible slurry pump is more convenient to use, as long as it is placed under the liquid, and there is no need to make a floating frame or support.

 

Difference Between Submersible Slurry Pump And Submerged Slurry Pump

ZJ Series Horizontal Slurry Pump

 

Usage and precautions of submersible slurry pump

1. Carefully check whether the cable is damaged, whether the fasteners are loose or fall off, and whether the pump is deformed or damaged during transportation, storage and installation.

2. The megger shall measure the insulation resistance between the same and relative ground of the electric pump motor, and its value shall not be less than 2 megohm. Otherwise, the motor stator winding shall be dried, and the drying temperature shall not exceed 120 ℃.

3. The rotation direction after connection is counterclockwise from the water inlet. If the electric pump is reversed, just adjust the wiring position of any two wires in the cable.

Difference Between Submersible Slurry Pump And Submerged Slurry Pump

Dredger Pumps and Parts

 

4. The casing ground wire must be properly connected in strict accordance with relevant regulations. In order to ensure life safety during use, it is strictly prohibited to install personnel nearby to enter the water when the electric pump is running.

5. Under no special circumstances, it must be equipped with full-automatic water pump control. Do not directly connect to the power grid or use the knife switch to connect the power supply to ensure the normal operation of the electric pump.

6. Operate the electric pump under low lift for a long time (generally, the lift shall not be less than 60% of the rated lift), Zui so that it can be controlled within the recommended lift range to prevent the electric pump from burning out the motor due to overload.

7. The pump of the circulating cooling device shall not be exposed to the water for a long time to prevent overheating and damage of the electric pump.

8. Frequency conversion speed regulation device is selected, which has a wider range of working conditions.

 

More information feel free to contact with us.


Comments

Post a Comment

Popular posts from this blog

Types of pumps suitable for mine sites

-
Image
Mine sites demand durability and reliability above all else for critical equipment such as pumps. Besides this, it is important that these pumps can handle the arduous nature of the pumped liquid. With a wide variety of pumps available for mine sites, deciding which one is right for your application can be challenging. In this blog, we  chat with our specialised Project's Team  to identify the different types of mine pumps available and what applications they are most suitable for.   SGB Pumps recommend the following pumps for mine sites: Slurry Pumps Slurry pumps are specifically built to handle the highly abrasive, high-density nature of slurries. Depending on the brand, slurry pumps maintain high efficiencies over the wear life of their components. There are a wide range of construction materials for maximum abrasion and corrosion resistance to suit various demanding mine site applications.   SGB Slurry Pump SGB slurry pump offer operators a completely d...
Read more

How to choose the right shaft seal for your slurry pump?

-
Image
In the classification of pumps, according to its condition of conveying slurry, we call the pump which is suitable for conveying liquid (medium) containing suspended solids as slurry pump. Slurry pump is currently one of the indispensable equipment in various processes such as mineral processing, coal processing, desulfurization and filter press feeding. As people pay more and more attention to environmental protection, the sealing of slurry pump is also paid more and more attention. Slurry pump shaft seal  mainly has three kinds: packing seal, vice impeller seal and mechanical seal. Each of these three shaft seals has its own advantages, which are introduced as follows.     Packing seal. The packing seal of the slurry pump relies on the soft and hard grinding between the packing and the shaft sleeve to achieve the sealing effect. Packing seal needs to add shaft seal water, and its pressure must exceed the slurry pump discharge pressure. This type of seal is easy to repla...
Read more

Slurry Pump For Sale

-
Image
Slurry Pump For Sale A slurry pump  is a type of pump designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, size of solid particles, shape of solid particles, and composition of solution. Slurry pump are more robust than liquid pumps; they have added sacrificial material and replaceable wear parts to withstand wear due to abrasion. Centrifugal, positive displacement, and vortex pumps can be used for slurry. Centrifugal slurry pumps can have between bearing-supported shafts with split casing or rubber- or metal-lined casing. Configurations include horizontal, vertical suspended and submersible. SGB Slurry Pump  is usually classified according to the concentration of solids. Engineering classification of slurry is more complex and involves concentration, particle size, shape and weight in order to determine abrasion severity.
Read more